Truck Mounted High-Pressure Multi-Purpose Jet Grouting Drilling
Machine Rigs
Geological hazard response, Disaster emergency rescuing, Drilling
Hole for rescuing in a mining collapse
Feature:
1. Integrated rotary drilling, auger drilling, pneumatic
down-the-hole hammer drilling, high-pressure rotary jet drilling,
and other drilling techniques.
2. It can reach the construction site quickly to save preparation
time and start working immediately.
3. Centralized operation, reasonable equipment layout, and small
working area.
4. The whole drilling rig system runs in a good condition and low
failure rate.
5. Uninterrupted construction is possible within a radius of 100
meters.
6. Equipped with a remote monitoring system, it helps to reduce the
number of people on site, ensure the safety of the command and
decision-making team, and minimize the loss caused by secondary
damage.
Hazard: Earthquake, Tsunami, Landslide, storm surge, flood
Solution purpose: Prevention and mitigation, Recovery
Product Description:
It is the customized equipment with a remote monitoring system,
which is grouped by customized low-plate semi-trailer, tractor,
multi-function drilling rig, high-pressure grouting pump, mixing
system, control cabinet, generator set, air compressor, drilling
tools, and others.
This equipment is widely used in compensation grouting in
geological disaster control for rescuing construction such as
roadbed and mountain landslides, road structure subsidence, and
mining collapse incidents. It can also perform the drilling hole
process rapidly by pneumatic DTH hammer and pipe drilling and
spiral drilling. It is applied in foundation construction, slope
stability by anchoring and jet grouting, shield-tunneling face
supported, drilling holes for the mine emergency rescuing, advanced
geological forecast, high-pressure jet grouting, cut-off water
curtain, ground or soil improvement with various drilling
techniques requirements, shallow drilling and geological
prospecting drilling projects.
Compensation Grout Application in construction:
1. Strengthing roadbed
2. Subsidence filling
3. Lansilide control
4. Diaphragm wall of dam reinforce
5. Underpinning to relevel overlying structure
6. Drilling hole rapidly in mining incidents for rescuing
Transportation Vehicle
|
| Equipment Name | Parameter item | Parameter |
| Tractor | Model | QL4250W2NCZ |
| Engine model | 6WG1-TCG51 |
| Emission Standards | National Ⅴ |
| Weight(kg) | 8870 |
| Traction total weight of (kg) | 40000 |
| Axles | 3 |
| Semi-trailer lowbed | Climbing ladder | Electric hydraulic ladder (remote control ) |
Main Equipment Group
|
| Generator | Rate(kW) | 200 (National Ⅲ) |
Air compressor
| Engine | (National Ⅲ) |
| Type | Screw air compressor |
| Air pressure(Mpa) | 1.5 |
| Displacement(m3/min) | 13 |
Drilling rig | Model | GL-6000S |
| Drilling depth (m) | 50-200 |
| Drilling diameter (mm) | Φ110～Φ400 |
| Drilling speed of power head (r/min) | Min:8-55 Max:16-110 |
| Torque of power head(Nm) | 3000-6000 |
| Power head stroke(mm) | 3000 |
| Maximum feed force(kN) | 58 |
| Maximum pulling force(kN) | 110 |
| Column sliding stroke(mm) | 1200 |
| Driving speed(km/h) | 1.5 |
| Power supply | Electric motor 55kw/Diesel engine56kw |
| Overall dimension(m) | 5.6x2x2.93 |
| Weight(kg) | 9500 |
Frequency-conversion high-pressure grouting pump
| Model | ZJB/BP-90A |
| Plunger diameter(mm) | 55 |
| Plunger stroke(mm) | 120 |
| Maximum flow(L/min) | 114(160) |
| Maximum pressure(Mpa) | 35 |
| Maximum pressure(kw) | 90 |
| Inlet diameter(mm) | 50 |
| Outlet diameter(mm) | 25 |
| Dimensions(mm) | 2490x1196x915 |
| Weight(kg) | 2200 |
| Cement Mixer | Model | NJ-1200 |
| Maximum capacity (L) | 1450 |
| Available capacity(L) | 1200 |
| Stiring speed(r/min) | 610 |
| Power(kw) | 11 |
| Dimensions(mm) | 1520x1650x1610 |
| Weight (kg) | 750 |
Company Profile:
Shannxi Xitan Geological Equipment Co., Ltd was established in 1958
as a specialized drilling rig manufacturer for more than 60 years.
High-pressure jet grouting rigs, multifunctional engineering
drilling rigs, anchor drilling rigs, and environmental drill rigs
are our featured products with advanced technology, and other
grouting equipment such as grouting pumps, and auto grout mixing
stations are low energy consumption, environmental protection, and
cost-effective. We are a High-pressure Jet Grouting Engineering
Technology Center and National High-tec Enterprise in ancient
City-Xi'an. The factory area is 23,000 m2. 300 million yuan production capacity per year can be reached. 150
million yuan has been invested in production line building and
technological innovation.
Factory Show:
RFQ:
1. Are you the manufacturer?
Ans: Yes, we are a factory with more than 60years of manufacturing
experience.
2. What are your terms of payment?
Ans: 50% deposit prepaid by T/T, and 50% before delivery. We'll
show you the photos of the products and packages before you pay the
balance.
3. How about your delivery time?
Ans: Except GY60/80 anchor drilling rig is not in stock, the common
drilling rig has in stock, and could be delivered in one week after
getting your full payment.
Customize drilling rig will take 15-45 days after receiving your
advance payment. The specific delivery depends on the items and the
quantity of your order.
4. What is the warranty of our machine?
Ans: Our main machine enjoys one year warranty. But unreasonable
operation and wearing parts exclude.
5. Do you test all your goods before delivery?
Ans: Yes, we have 100% test before delivery. And we will attach our
inspection report for every machine.
6. Do you have after-service?
Ans: Yes, we have a special after-sales service team that will
supply you with professional guidance. And we provide videos for
machine installation and operation.
If you need, we can send our engineers to your worksite and provide
the training for your staff.
